UltiMaker
Method XL

The physical space inside the Method XL that can be used when dual extrusion 3D printing. Measured in X, Y, and Z.

The outer dimensions of the Method XL and the accompanying material case.

This is the process of depositing layers of filament, one on top of the other, to build up shapes and models. It is a form of additive manufacturing technology and the process used by all UltiMaker 3D printers.

The filament diameter that achieves optimal results on UltiMaker Method series 3D printers.

The net weight of the Method XL and the accompanying material case.

The peak power output that the printer can reach – usually when the heated bed and hot ends are heating up.

A micron is the measurement used to define the thickness of a 3D printed layer. 20 micron is 0.02 mm thick. Thinner layers are used for high-detail prints, thicker layers are great for fast prototypes.

The touchscreen allows you to start, stop, and monitor prints on your Method series printer. As well as allowing you to calibrate your printer and install firmware updates without needing to use a computer or other device.

Faster extruder changes mean higher uptime and easier maintenance. The Method XL comes with 1C, 2A, and 2XA extruders for printing polymers, composites, and soluble support materials. The Labs extruder is sold separately for printing third-party materials.

Thanks to swappable extruders, you can quickly switch to the extruder that matches the material you are trying to print. This results in higher uptime and easier maintenance of your 3D printer.

The nozzel diameter controls how much material can be extruded at once. All Method series extruders have 0.4 mm nozzles.

The thermally regulated heated chamber is able to rise to the target temp and stay there for the duration of the print ensuring an optimal print environment.

The build plate heats up during printing in order to improve the adhesion of the print to the build surface.

The extruder temperature varies by which material is being printed. The high max temperature available on the Method series of printers allows for printing with high-temp materials.

The operating sound will vary at different stages of a print.

Simply bend the build plate and your 3D printed parts pop off. Replacement build surfaces are available if the surface of your build plate becomes damaged.

UltiMaker 云打印 is the slicing and printer management 软件 that allows for an intuitive workflow from digital file to final part.

Print with one click via Wi-Fi or Ethernet connection from UltiMaker 云打印. Or export your print job to a USB stick.